Standard 8′ High – 2 ADA Swing – 1 Bay – Residential Only

This set is very heavy duty.  Each bay is designed for two children up to 12 years old, per ASTM and CPSC guidelines.  If installed according to installation instructions, our sets will more than meet these requirements.

Actual weight limits depend upon how the set is installed, the amount of concrete, the type of dirt in which the set is installed, how much use, etc.  Therefore, we do not state weight limits for our swing sets.

This frame is for an in ground standard 8’ high set. You will need to specify colors for the End Frame Fittings and the two ADA swings.  This product should last 2 years in harsh conditions and up to 5 years in optimal conditions. Some conditions may require replacement sooner.

TOOLS AND PARTS NEEDED:
Ladder, ¾” wrench, Ratchet socket wrench, Tape measure, H175 supplied Allen wrench for shackles, and 6mm Allen wrench for set screws. Stakes for marking holes. Shovel, Bricks, Gravel, Wheelbarrow for mixing concrete, Water, Concrete, Trowel, Level, Warning signs.   Protective surfacing according to ASTM F1292 for a fall height of 8’.

PARTS INCLUDED ARE:

EFF2 – 2 blue or green
ADA – 2 black, blue, green, red or yellow
SH114 – 4
C100 – 4 – 6’ / 4 – 2’6″
H170 – 4
Pipe Legs A – B – 11’6″ – 4
H173 – 4
Top Rail 10’ – 1
H175 – 1
MEASUREMENTS FOR SWING FRAME:  See Resources page for “Swing Frame Above-Below Ground Dimensions”

The legs are 203” apart lengthwise at ground level. The legs are 93” wide at ground level. Below ground, the legs are 220” lengthwise and the width below ground is 115”. Height is 8’